If you have some basic shop tools, or have access to them, you can teach yourself to make your own survival knives. YouTube has a vast amount of how-to videos that can teach you the easiest way to make a knife.
This post is to show what you can achieve with a little exploring and training. This post is not a step by step tutorial, but rather a little journey I took into the field of knife making.
Here is a list of tools and materials I used to build the knives that you see here in the video and the post.
Old circular saw blades that are beyond useable
Old worn out lawn mower blades
Deer or Elk antlers
Seasoned mesquite wood
13/16" brass brazing rod (at least a foot long to make several knives)
Gorilla glue or some other strong glue
Sand paper, coarse and fine grit
Permanent marker and wood pencil
Flat paint, type used for plastics (your choice of color)
Linseed oil or tongue oil
PVC pipe, schedule 40, 2 inch diameter, 6 ft length (for sheath making)
90 degree hand grinder with metal cutting wheels
Hacksaw with extra blades
Vise grip pliers
Large "C" clamp
Table mounted wheel grinder
Band saw/Table saw with thin wood blades
Table top belt sander
Ball peen hammer
Anvil or something similar
Hand metal files
Rivet gun with 1/8 inch rivets with washer backings.
Basically, I start with the knife pattern I want to make. You can use Google images and search for survival knife blades and you can get many ideas on the shape of the knife that you want, or design or own.
Then choose the metal you want to use for the knife. I like to use circular saw blades and lawn mower blades. As long as you do not get the metal too hot while grinding, you will not need to heat treat the metal before putting on a cutting edge.
Above are blanks that were cut out of a circular saw blade and a lawn mower blade. I used the table mounted grinder to take down the rough and uneven surfaces and give the knife its shape. I also use the grinder to put on the rough angle of the cutting edge. I use a hand file to take the cutting edge down to the sharpness and then use a diamond or stone sharpener to finish the fine edge.
Above is a knife being cut from a lawn mower blade. I used a C-clamp and vise grips to hold it down to the table, since I do not have a table mounted vise. I use the 90 degree hand grinder with a metal cutting wheel to cut out the knife blanks.
In the above photo, I used a hand file to fine tune the cutting edge and angle and to smooth the edges of the rest of the knife.
In the above photo, I am ready to add the handle. On the blade, I am using mule deer antler. I cut two brass pins to attach the handle with. I use the ball peen hammer to expand the ends of the pins so that they are larger than the drilled holes. I add the glue to the back sides of the handles before adding the pins. This gives it a little extra holding grip.
Above is the almost finished mower blade knife. This is of my own design. I just need to fine tune the cutting edge with a diamond sharpener and make a sheath. I added some Linseed oil to the handle to help preserve it.
Next, I used schedule 40 PVC pipe to make my knife sheaths. It is much cheaper than Kydex. I used the band saw to cut the PVC, as well as the deer antlers and mesquite that I make the handles from. PVC pipe becomes rubbery and moldable when heated with a heat gun. I cut the pipe into two halves length wise and then heat and flatten them out to be measured for the knife.
Above I have already measured, shaped and added rivets to hold the two halves of my sheath together. Now all I have to do is draw the outline for the shape of the sheath and trim it on the band saw. I then used the table sander to even the edges. Before painting the PVC, you need to rough up the surface with sand paper so that the paint will stick better. I used the type of paint that is used for plastics.
Above is the completed sheath ready to be painted. I just need to drill two holes at the bottom to put para-chord for tying to the leg or for whatever.
Above are some completed knives that I have taught myself (with the help of a lot of talented YouTuber's) to make. Four of the knives are of my own design. I will be field testing them when I start my three day survival trek video. On the next sheath design, I plan on adding a place to hold a sharpener and a ferrous fire rod or maybe even a survival kit.
I did not think I had the ability to actually make my own knife, but when you put your mind to something and are determine to succeed, you can succeed. These knives are not show room quality, but I did not want them to be. I like the rustic hand-made look that they have and know that they are fully functional for what I intended for them to be.
Go ahead! Give it a try. Design the knife of your dream. Or just have fun trying. This skill could become very handy in the near future.
Stay Prepared! Stay Alive!
beautiful knife, I did one of a old saw blade is not so handsome but it is very practical https://www.patriotdirect.org/step-by-step-instructions-to-make-a-knife-from-an-old-saw-cutting-edge/ReplyDelete
The most commonly used steels are C60, C75, C75Cr and 50CrV4. These steels are usually toughened by mixing different metals together.The saw tooth is made with hard metal or a high-speed metal plate. Sawmill requirements for band saw blades are constantly changing and increasing to better the lifespan and cutting accuracy.tbreviews.com/top-12-best-band-saw-reviews-on-the-market/ReplyDelete
The basic design of the folding pocket knife was originally seen in the peasant knife or farmer knife or penny knife. Pocket knifeReplyDelete
Fired blades ought not supplant your steel blades, simply compliment them. This will guarantee that you have the most ideal kitchen cut for each activity in your kitchen. camping knifeReplyDelete
I love to have the various types of survival knives as this is my favorite.They help me write my essay so that I can get all the information regarding the different kinds of knives.ReplyDelete
Truly, this article is really one of the very best in the history of articles. I am a antique ’Article’ collector and I sometimes read some new articles if I find them interesting. And I found this one pretty fascinating and it should go into my collection. Very good work. Best MachetesReplyDelete